Facility scenario
ICU with standard bed spaces and isolation rooms: infection control set-up
A typical intensive care unit combines open or single standard bed spaces with one or more isolation rooms. Standard spaces are rarely empty; isolation rooms must contain airborne or contact-transmitted organisms and be safely turned around after discharge. Shared devices move constantly between beds.
What CDC guidance emphasises
- Airborne infection isolation rooms: negative pressure, at least 12 air changes per hour (new or renovated), doors kept closed.
- After an airborne-isolation patient leaves, keep the room closed long enough for air changes to clear it before the next patient.
- Contact precautions: dedicated equipment where possible, otherwise clean and disinfect before use on another patient.
- Clean and disinfect high-touch surfaces routinely and thoroughly at discharge; no-touch UV is an adjunct to manual cleaning.
Recommended set-up
What each zone needs
Starting recommendations. Quantities and placement are confirmed by a site survey.
Zone
Standard ICU bed spaces
Occupied most of the time; protection has to work around patients and staff.
Zone
Isolation rooms
Airborne isolation needs negative pressure and air changes; contact isolation needs thorough surface disinfection at discharge.
- BIOCAIR®Adds a negative-pressure isolation room where the unit lacks one. Sizing: per additional isolation room needed.
- HEPA air filtration unitsAugments air changes and filtration inside existing isolation rooms. Sizing: by room volume and target air changes.
- THOR UVCTerminal disinfection after the air-clearance time and manual cleaning. Sizing: shared with standard bed spaces.
- ZenerContinuous protection in the anteroom. Sizing: per anteroom.
Zone
Nurses' station and shared equipment
Monitors' accessories, tablets, phones and scanners pass between patients.
Zone
Immunocompromised ICU patients
Haematology or transplant patients admitted to ICU.
- PLASMAIRHEPA-MD® air decontamination at the bedside. Sizing: per protected bed.
Equipment summary
Equipment list for this scenario
| Zone | Equipment | Role | Sizing basis |
|---|---|---|---|
| Standard ICU bed spaces | Zener | Continuous far-UVC for air and surfaces while occupied | Per bed space or bay, set by ceiling height at survey |
| Standard ICU bed spaces | THOR UVC | UVC terminal disinfection after discharge | One robot typically serves a unit or floor |
| Isolation rooms | BIOCAIR® | Adds a negative-pressure isolation room where the unit lacks one | Per additional isolation room needed |
| Isolation rooms | HEPA air filtration units | Augments air changes and filtration inside existing isolation rooms | By room volume and target air changes |
| Isolation rooms | THOR UVC | Terminal disinfection after the air-clearance time and manual cleaning | Shared with standard bed spaces |
| Isolation rooms | Zener | Continuous protection in the anteroom | Per anteroom |
| Nurses' station and shared equipment | HYPERION | Shared noncritical devices between patients | One per unit |
| Nurses' station and shared equipment | ZEUS | Phones, pagers and small items at the station | One per nurses' station |
| Immunocompromised ICU patients | PLASMAIR | HEPA-MD® air decontamination at the bedside | Per protected bed |
Works alongside your existing measures
- Isolation-room ventilation and pressure monitoring
- Manual cleaning with approved disinfectants and hand hygiene
CDC references
- CDC/HICPAC. Guidelines for Environmental Infection Control in Health-Care Facilities. MMWR 2003;52(RR-10), updated 2019. Source
- CDC/HICPAC (Siegel JD, et al.). 2007 Guideline for Isolation Precautions: Preventing Transmission of Infectious Agents in Healthcare Settings.
- CDC/HICPAC (Rutala WA, Weber DJ). Guideline for Disinfection and Sterilization in Healthcare Facilities, 2008, updated 2019.
CDC recommendations are product-neutral. Each row shows the CDC recommendation for the application and how the device helps put it into practice, as an additional layer alongside ventilation, manual cleaning, hand hygiene and reprocessing.
Get this set-up sized for your facility
Share your room list and we will prepare a preliminary equipment plan.
Other scenarios
Isolation ward
An isolation ward cares for patients with airborne or contact-transmitted infections, often with more demand than available isolation rooms during outbreaks or seasonal peaks..
View set-up →ScenarioOperating theatre
An operating theatre needs a clean environment during surgery and a reliable, fast turnaround between cases, without compromising the ventilation system it was designed with..
View set-up →ScenarioHaematology & oncology ward
Neutropenic and transplant patients are highly vulnerable to airborne fungi such as Aspergillus, particularly during construction nearby..
View set-up →
